DIY Advice
Posted May 02, 2007
4. Replace the door!
• STEP 3: Grasp the outside door edge with one hand and pull the pins on out with the other. You may need to jiggle the pins a bit or swing the door gently back and forth a couple of inches to free up tight pins.
• STEP 4: Place the door aside or take it where it will be worked on.
• STEP 5: Set the door back on the hinges by holding it at the outer edge and aligning the hinges. Slip the pins in - the same jiggling motion may be needed to get the pins to slide in. A gentle tap on the top with a hammer will get them firmly seated and the job is finished.